B1:=MA(C,1);
B2:=SMA(SMA(SMA(B1,2,1),2,1),2,1);
SMA2:=MA(B2,3);
停损下限:IF(LLV(MA(B2,8),3)
IF(B2
VAR1A:=(2*CLOSE+HIGH+LOW)/4;
VAR2A:=MA(VAR1A,7);
VAR3A:=VAR2A-MA(VAR1A,7/2)<0;
VAR4A:=VAR2A-MA(VAR1A,7/2)>0;
VAR5A:=BARSLAST(VAR3A);
VAR6A:=0-BARSLAST(VAR4A);
VAR7A:=IF(VAR3A<=0,VAR5A,VAR6A);
STICKLINE(SNAKEA>B2 AND B2>SMA2,SNAKEA,B2,0,0),COLORFFFF00;
STICKLINE(SNAKEA>SMA2 AND B2
VAR21A:=EMA(VAR11A,13)-EMA(VAR11A,34);
VAR31A:=EMA(VAR21A,5);
VAR2:=((CLOSE > REF(CLOSE,1)) AND (CLOSE > REF(CLOSE,2)));
VAR3:=((REF(VAR2,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VAR4:=((REF(VAR3,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VAR5:=((REF(VAR4,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VAR6:=((REF(VAR5,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VAR7:=((REF(VAR6,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VAR8:=((REF(VAR7,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VAR9:=((REF(VAR8,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VARA:=((REF(VAR9,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VARB:=((REF(VARA,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VARC:=((REF(VARB,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VARD:=((REF(VARC,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VARE:=((CLOSE < REF(CLOSE,1)) AND (CLOSE < REF(CLOSE,2)));
VARF:=((REF(VARE,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VAR10:=((REF(VARF,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VAR11:=((REF(VAR10,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VAR12:=((REF(VAR11,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VAR13:=((REF(VAR12,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VAR14:=((REF(VAR13,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VAR15:=((REF(VAR14,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VAR16:=((REF(VAR15,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VAR17:=((REF(VAR16,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VAR18:=((REF(VAR17,1) AND (CLOSE <= REF(CLOSE,1))) AND (CLOSE >= REF(CLOSE,2)));
VAR19:=((REF(VAR18,1) AND (CLOSE >= REF(CLOSE,1))) AND (CLOSE <= REF(CLOSE,2)));
VAR1B:=(REF((((((((((((VARE OR VARF) OR VAR10) OR VAR11) OR VAR12) OR VAR13) OR VAR14) OR VAR15) OR VAR16) OR VAR17) OR VAR18) OR VAR19),1) AND VAR2);
{STICKLINE(VAR1B,O,O+(C-O)/3,3,0),COLOR10D0FF;}
STICKLINE(VAR1B,O,O+(C-O)/3,2,0),COLOR10FFFF;
STICKLINE(VAR1B,O,O+(C-O)/3,1,0),COLOR00FFFF;
AA:=(REF((((((((((((VAR2 OR VAR3) OR VAR4) OR VAR5) OR VAR6) OR VAR7) OR VAR8) OR VAR9) OR VARA) OR VARB) OR VARC) OR VARD),1) AND VARE);
{STICKLINE(AA,O,O+(C-O)/3,3,0),COLOR00DD00;}
STICKLINE(AA,O,O+(C-O)/3,2,0),COLOR00EE00;
STICKLINE(AA,O,O+(C-O)/3,1,0),COLOR00FF00;
A13:=EMA(CLOSE,55);
A14:=MA(CLOSE,75);
A15:=EMA(A14,3);
A16:=EMA(A15,3);
A17:=(HIGH + LOW) / 5;
A18:=(MA(A17,4)) - (MA(A17,34));
A19:=CROSS(A18,0);
A20:=CROSS(0,A18);
A21:=BARSLAST(A19);
A22:=BARSLAST(A20);
A23:=REF(A19,1);
A24:=REF(A20,1);
A25:=BARSLAST(A23);
A26:=BARSLAST(A24);
A27:=IF((A25 < A26),(REF((HHV(HIGH,2)),A25)),(REF((LLV(LOW,2)),A26)));
A28:=(((REF(CLOSE,1)) <= (REF(A27,1))) AND (CLOSE > A27)) AND (A21 < A22);
A29:=(((REF(CLOSE,1)) >= (REF(A27,1))) AND (CLOSE < A27)) AND (A22 < A21);
A30:=A28 AND ((COUNT(A28,A21)) = 1);
A31:=A29 AND ((COUNT(A29,A22)) = 1);
A32:=A30 AND ((REF(BARSLAST(A31),1)) < (REF(BARSLAST(A30),1)));
A33:=A31 AND ((REF(BARSLAST(A31),1)) > (REF(BARSLAST(A30),1)));
DRAWTEXT(A32,SMA2*0.99,'←═≒∝'),coloryellow;
AC:=AMOUNT/(VOL);
YY:=MA(AC,13);
LLL:=(C-YY)/YY*100;
MIDC := MA(CLOSE,22);
UPPERC:= MIDC + 2*STD(C,22);
LOWERC:= MIDC - 2*STD(C,22);
BBA:=(C-LOWERC)/(UPPERC-LOWERC);
BBC:=FORCAST(BBA,3);
LIFENGCYC:=(REF(LLL,1)<-15 AND REF(BBA,1)<0 AND LLL>REF(LLL,1));
STICKLINE(LIFENGCYC>0,C,O,2,0),COLOR10ABFF;
DRAWTEXT(LIFENGCYC>0,LOW*0.99,'☆'),COLORDD00DD;
{};
徐小明老师的定量结构(顶尖财经 股票学院: ):
DIF:100*(EMA(CLOSE,12)-EMA(CLOSE,26));
DEA:EMA(DIF,9);
MACD:(DIF-DEA)*2,COLORSTICK;
//{底部结构预警}
死叉:=CROSS(DEA,DIF);
N1:BARSLAST(死叉),NODRAW;//{最近一次死叉的位置---最近一次死叉到当前位置的单位数量}
N2:REF(BARSLAST(死叉),N1+1),NODRAW;//{倒数第二次死叉与倒数第一次死叉的区间--2次死叉间的单位数量}
N3:REF(BARSLAST(死叉),N2+N1+2),NODRAW;//{倒数第三次死叉与倒数第二次死叉的区间--2次死叉间的单位数量}
CL1:=LLV(C,N1+1),NODRAW;//{最近一次死叉后,最低收盘价}
DIFL1:=LLV(DIF,N1+1),NODRAW; //{最近1死叉后,最低DIF}
CL2:=REF(CL1,N1+1),NODRAW;//{倒数第二次死叉与倒数第一次死叉之间的最低收盘价}
DIFL2:=REF(DIFL1,N1+1),NODRAW; //{倒数2死叉与倒数1死叉之间的最低DIF}
CL3:=REF(CL2,N1+1),NODRAW;//{倒数第三次死叉与倒数第二次死叉之间的最低收盘价}
DIFL3:=REF(DIFL2,N1+1),NODRAW; //{倒数3死叉与倒数2死叉之间的最低DIF}
PDIFL2:=IF(DIFL2>0,INTPART(LOG(DIFL2))-1,INTPART(LOG(-DIFL2))-1);
MDIFL2:=INTPART(DIFL2/POW(10,PDIFL2));
PDIFL3:=IF(DIFL3>0,INTPART(LOG(DIFL3))-1,INTPART(LOG(-DIFL3))-1);
MDIFL3:=INTPART(DIFL3/POW(10,PDIFL3));
MDIFB2:=INTPART(DIF/POW(10,PDIFL2));
MDIFB3:=INTPART(DIF/POW(10,PDIFL3));
直接底背离:=(CL1
隔峰底背离:=(CL1
B:直接底背离 OR 隔峰底背离,NODRAW;//www.70822.com
BG:((MDIFB2>REF(MDIFB2,1))*REF(直接底背离,1)) OR ((MDIFB3>REF(MDIFB3,1))*REF(隔峰底背离,1)),NODRAW;
底背离消失:=(REF(直接底背离,1) AND DIFL1<=DIFL2 ) OR (REF(隔峰底背离,1) AND DIFL1<=DIFL3);
STICKLINE(B OR BG,DIF,DEA,8,0),colorred; //{划线标识钝化状态}
DRAWTEXT((B AND COUNT(B,2)=1),(DIF*1.5),'钝化'),coloryellow;
DRAWTEXT(FILTER(BG,10),DIF*1.5,'底部结构'),colormagenta;
DRAWTEXT(FILTER(BG,10) AND MACD<=0,DIF*1.2,'MACD<0,成功率高'),colormagenta;
DRAWTEXT(FILTER(底背离消失,10),(DIF+MACD),'消失'),colorgreen;
STICKLINE(BG,0,DIF+DEA,5,0), colorred;
//{顶部结构预警}
金叉:=CROSS(DIF,DEA);
M1:=BARSLAST(金叉),NODRAW;//{最近一次金叉的位置}
M2:=REF(BARSLAST(金叉),M1+1),NODRAW;//{倒数第二次金叉与倒数第一次金叉的区间}
M3:=REF(BARSLAST(金叉),M2+M1+2),NODRAW;//{倒数第三次金叉与倒数第二次金叉的区间}
CH1:=HHV(C,M1+1),NODRAW;//{最近一次金叉后,最高收盘价}
DIFH1:=HHV(DIF,M1+1),NODRAW;
CH2:=REF(CH1,M1+1),NODRAW;//{倒数第二次金叉与倒数第一次金叉之间的最高收盘价}
DIFH2:=REF(DIFH1,M1+1),NODRAW;
CH3:=REF(CH2,M1+1),NODRAW;//{倒数第三次金叉与倒数第二次金叉之间的最高收盘价}
DIFH3:=REF(DIFH2,M1+1),NODRAW;
PDIFH2:=IF(DIFH2>0,INTPART(LOG(DIFH2))-1,INTPART(LOG(-DIFH2))-1);
MDIFH2:=INTPART(DIFH2/POW(10,PDIFH2));
PDIFH3:=IF(DIFH3>0,INTPART(LOG(DIFH3))-1,INTPART(LOG(-DIFH3))-1);
MDIFH3:=INTPART(DIFH3/POW(10,PDIFH3));
MDIFT2:=INTPART(DIF/POW(10,PDIFH2));
MDIFT3:=INTPART(DIF/POW(10,PDIFH3));
直接顶背离:=(CH1>CH2 ) AND (MDIFT2
隔峰顶背离:=(CH1>CH3) AND (MDIFT3
T:=直接顶背离 OR 隔峰顶背离,NODRAW;
TG:=((MDIFT2顶背离消失:=(REF(直接顶背离,1) AND DIFH1>=DIFH2 ) OR (REF(隔峰顶背离,1) AND DIFH1>=DIFH3);
STICKLINE(TG,0,DIF+DEA,5,0), colorgreen;
STICKLINE(T OR TG,DIF,DEA,8,0),colorgreen;
DRAWTEXT(FILTER(TG,20),DIF*1.4,'顶部结构'),colorgreen;
DRAWTEXT(FILTER(TG,20) AND MACD>=0,DIF*1.7,'MACD>=0,成功率高'),colorgreen;
DRAWTEXT(FILTER(顶背离消失,20),(DIF+MACD),'消失'),colorgreen;